A standing seam metal roof is made of long vertical steel panels joined by raised seams, with the fasteners hidden under the seams instead of screwed through the face of the panel. Heritage Roofing & Repair installs standing seam roofs on homes and commercial buildings from our Berryville and Harrison offices, and we have served the Arkansas Ozarks since 1968.

Why standing seam holds up in the Ozarks
- Hidden fasteners: no exposed screws to back out, rust or leak, which is the most common failure on older exposed-fastener metal roofs.
- Room to move: panels are held by clips that let the metal expand and contract through hot summers and cold snaps without buckling.
- Storm performance: the smooth, continuous panels shed rain, snow and hail. Boone County storm warnings come from the NWS Little Rock office and Carroll County’s from NWS Tulsa; spring hail is the main threat in both.
- Solar-ready: panels and snow guards can clamp to the seams without drilling through the roof.
Snap-lock or mechanical lock?
Snap-lock panels click together and suit most homes with a moderate or steep pitch. Mechanically seamed panels are folded shut with a seaming tool, which makes a tighter seam for low-slope and commercial roofs. We recommend the right panel after measuring your roof’s pitch at the free inspection.
Standing seam vs. other roofs
Standing seam costs more up front than asphalt shingles or exposed-fastener ribbed panels, but it lasts decades longer and needs little upkeep. If you want the strength of steel with the look of shingles, see stone-coated steel roofing. For a side-by-side, read our standing seam vs. shingles comparison.
How a standing seam project works
- Free roof inspection: we check the decking, pitch, ventilation and any storm damage.
- Written estimate with the panel profile, color and trim spelled out.
- Tear-off or prep, new underlayment, then panels, trim and flashing.
- Final walk-through and full nail and debris cleanup.
If hail damaged your current roof, our insurance roof claim help can start before the new roof does.

Where we install standing seam roofs
Our Berryville office covers Carroll County, including Eureka Springs and Green Forest. Our Harrison office covers Boone County and nearby Branson and Hollister, MO. See all our metal roofing options.
Heritage Roofing & Repair · 3458 Hwy 221 N, Berryville, AR 72616 · (870) 654-1164
Heritage Roofing & Repair · 1414 Goblin Drive, Suite #2, Harrison, AR 72601 · (870) 293-0737
Open 24 hours, 7 days a week. Book a free roof inspection.
Standing seam metal roofing FAQs
How long does a standing seam metal roof last?
A well-installed standing seam roof typically lasts 40 to 70 years, much longer than asphalt shingles.
Is a standing seam metal roof worth it in Arkansas?
For most homeowners who plan to stay, yes. It handles hail, wind and heat better than shingles and rarely needs repairs, so the higher up-front cost is spread over many more years.
Is a standing seam roof noisy in the rain?
Not when it is installed over solid decking and underlayment, which is how we install residential metal roofs. Most homeowners hear little difference from shingles.
Can standing seam go over my existing shingles?
Sometimes. It depends on the condition of the old roof and the decking. We check during the free inspection and tell you whether a tear-off is the better choice.
What is the difference between snap-lock and mechanical lock?
Snap-lock panels click together and suit most homes. Mechanical lock seams are folded shut with a tool for a tighter seal on low-slope roofs.
Does hail dent a standing seam roof?
Large hail can dent any metal, but dents are usually cosmetic and the roof keeps shedding water. Impact-rated panels resist denting better; ask your insurer whether they qualify for a discount.
Do you install standing seam on commercial buildings?
Yes. We install metal roofs on homes, farm buildings and businesses. See our commercial roofing page for flat and low-slope systems.
What warranty comes with a standing seam roof?
Warranty terms depend on the panels and finish you choose. We spell them out in your written estimate before any work starts.



